The Elecrow 7‑inch IPS HD Touch Screen‑D 1024×600 HD Monitor is a compact HDMI display designed for single-board computers and embedded systems. It is commonly used with development boards such as the Raspberry Pi and BeagleBone. The display combines a 7-inch IPS panel with capacitive touch input and simple plug-and-play connectivity.
This article gives an overview of the display and explains how it can be used in electronics and embedded projects.
Where to Buy
7inch IPS HD Touch Screen
Makerguides is a participant in affiliate advertising programs designed to provide a means for sites to earn advertising fees by linking to Amazon, AliExpress, Elecrow, and other sites. As an Affiliate we may earn from qualifying purchases.
Overview
Small HDMI monitors are useful during development and debugging of embedded systems. A dedicated display makes it easier to interact with a device without connecting a full desktop monitor.
The Elecrow 7-inch IPS monitor uses an IPS panel with a native resolution of 1024×600 pixels. The display accepts HDMI video signals and supports input resolutions up to 1080p. This allows it to work with many computers, development boards, and game consoles.
Touch input is handled by a capacitive controller that supports up to five simultaneous touch points. The touch interface connects through USB and normally works without additional drivers on supported operating systems.
The monitor is designed for simple integration into embedded systems. Development boards can be mounted on the back of the display using the provided mounting holes and accessories. See the photo below:
Technical Specification
The following table provides a summary of the features of the 7inch IPS HD Touch Screen Display:
| Specification | Value |
|---|---|
| Display size | 7 inch |
| Display type | IPS LCD |
| Native resolution | 1024 × 600 pixels |
| Supported input resolution | Up to 1920 × 1080 |
| Aspect ratio | 16:9 |
| Touch type | Capacitive multi-touch |
| Touch points | Up to 5 points |
| Viewing angle | 178° |
| Brightness | ~320 cd/m² |
| Response time | ~5 ms |
| Refresh rate | 60 Hz |
| Video interface | HDMI |
| Touch interface | USB |
| Audio output | 3.5 mm headphone jack |
| Power supply | 5 V via USB-C |
| Power consumption | ~2.5 W |
| Active display area | ~154 × 86 mm |
| Module dimensions | ~165 × 102 × 15 mm |
| Weight | ~223 g |
| Supported systems | Raspberry Pi, BeagleBone, Windows PCs, other HDMI devices |
Display
The monitor uses a 7-inch IPS panel. IPS technology provides consistent colors and a wide viewing angle. The viewing angle is specified at about 178 degrees, which means the image remains visible from most directions.
The native resolution of the display is 1024×600 pixels. This resolution is suitable for graphical user interfaces, dashboards, and terminal windows in embedded projects. The refresh rate is 60 Hz and the response time is around 5 ms.
The display uses LED backlighting with a brightness of about 320 cd/m². The active display area measures approximately 154 × 86 mm. The complete monitor has dimensions of about 165 × 102 × 15 mm and weighs roughly 223 g.
Interfaces and hardware features
The monitor receives video through an HDMI interface. Many development boards, including Raspberry Pi models, provide HDMI output and can therefore connect directly to the display. The photo below shows the back of the display with the various interfaces and features:
Touch input is transmitted over USB. A USB cable connects the touch controller to the host system. Most modern operating systems recognize the device automatically, so no additional driver installation is required.
Power is supplied through a USB-C connector with a typical voltage of 5 V. The display consumes around 2.5 W during operation.
The monitor also includes an on-screen display (OSD) menu. Using the hardware buttons, you can adjust settings such as brightness and contrast directly on the display.
A 3.5 mm audio output jack is available for headphones or speakers when the HDMI source provides audio.
Compatibility
The monitor supports a wide range of systems and operating systems. It is commonly used with single-board computers such as Raspberry Pi, BeagleBone Black, and Banana Pi. For instance, it works very nicely with the Mini PC Case for the Raspberry Pi 5 that we introduced in our Elecrow Pitower Gen 1 review:
When connected to a Raspberry Pi, the display works with standard distributions such as Raspberry Pi OS or Ubuntu. Touch functionality usually works immediately after connecting the USB cable. The picture below shows how to connect the display to a Raspberry Pi:
The display can also be used as a secondary monitor for desktop computers. Windows operating systems from Windows 7 to Windows 11 support the display and the touch interface.
Because the display uses HDMI, it can also connect to other devices such as game consoles or media players.
Typical applications
A small touchscreen monitor is useful in many electronics and IoT projects. Developers often use it as a local interface for embedded devices.
For example, the display can serve as a user interface for a Raspberry Pi home automation system. It can also display system status information or sensor dashboards in IoT projects.
Another common use case is development and debugging. A compact touch monitor allows you to interact with a headless system directly without connecting a keyboard, mouse, and large display.
The monitor can also be used for multimedia projects or as a portable secondary display.
Conclusion
The Elecrow 7‑inch IPS HD Touch Screen‑D 1024×600 HD Monitor is a compact touchscreen display designed for embedded and single-board computer projects. It combines an IPS panel, capacitive touch input, and simple HDMI connectivity.
Its driverless USB touch interface and wide compatibility make it easy to integrate with platforms such as Raspberry Pi and BeagleBone. The small size and mounting options also allow developers to build compact all-in-one systems.
For makers and engineers working with embedded hardware, a small HDMI touchscreen like this can be a practical addition to a development setup.
If you are looking for a small, round display with an HDMI interface, have a look at our Elecrow 2.8inch Round IPS Display HDMI article.
Happy Tinkering ; )
Stefan is a professional software developer and researcher. He has worked in robotics, bioinformatics, image/audio processing and education at Siemens, IBM and Google. He specializes in AI and machine learning and has a keen interest in DIY projects involving Arduino and 3D printing.